The valve is typically consists of a valve seat and a valve seat ring. Both work together with other parts of the valve
to create an airtight environment for the proper function of the valve. Valves
are used in almost every sphere of life, be it the heart of the water
pipelines.
The
Valve seat
The valve
seat is that portion of the valve that comes in contact movable
component which defines the quantum of flow of the gas or liquid. The broad
spectrum functions of the valve seat
are:
- To prevent the gas or liquid from getting into the lines
- To let a defined amount of heat travel to the cylinder head
- To maintain a proper seal for the valve
- To resist pressure, which makes the valve, durable by reducing wear and tear
The valve seat ring
The ring is
basically a component that prevents leakages and is held in place due to the
pressure. The seat ring may be threaded or screwed to the body of the
valve. The valve seat and the valve seat ring
work in coordination with the gasket, spring and valves plates for effective
and efficient working of the valve. The gasket creates an airtight seal, the
springs control the opening or closing of the valves, while the valve plates
regulate the flow of the fluid or air.
Rego’s check valve is made
from brass to offer durability and reliability. The metal seat can withstand a
pressure up to 3000 psig and is widely used in inline systems. One of the wide
applications of the check valve is in beer brewing. This valve available at JTC Valve Sales is used for dispensing stout beers that used
nitrogen gas. Visit jtc valve sales to find the highest quality of valves and
regulators.
No comments:
Post a Comment